1.2.1.3.1 Shipyard - Building - Nestor
| Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|
|
1.2.1.3.1 Shipyard - Building - Nestor |
||||||||
|
|||||||||
|
|
| Nestor (4th of 7) (last update: 8 August 2007) |
|
||
| |
|||
|
|||
Fig. 1.2.9 l, m ,n, o, After several iterations and alternations, we have developed a decent leak-tight joint - made of 316L stainless with two embedded 'O' rings on each side; this joint proves as much simpler, more robust and efficient then system suggested in the original Gerr's Nester. Note, seat brackets are not yet in place in Figs l,m. . ... ... all joints are reinforced by 10mm aluminium plate from both sideds... |
|||
| |
|||
NEXT>> |
|||
| << Previous • Next >> |
| ©2005 QFFF Design • | Shipyard • Building • Home |